Designation
Assistant Professor
Education
D.M.E.
B.E.( Mech.) Gold Medalist
M.E.( Design),
PhD
Area of Research
Micromachining, Digital Twin
Experience
25 years
Courses Taught
UG Level: Automatic Control Systems, Machine Design, Tribology, Optimisation
PG Level: Automatic Control, Design for Manufacturing and Assembly
Publications
1) Selmokar P. H., Mundra S. S., Pardeshi S. S., “Necessity of current and voltage signature analysis in WEDM”, International journal of Emerging Technology and Advanced Engineering, Volume 3, Issue 2, February 2013
2) Preetam Selmokar, Sujit Pardeshi, “Experimental Investigation for Difficult-to-Machine Materials Using Micro-EDM”, International journal of research in mechanical engineering (IJRMET) vol. 4, Issue 2, May-October 2014, pp.178-181.
3) Preetam Selmokar, AkibAttar, Sujit Pardeshi, “Effect of debris flushing in Micro-WEDM”, May 2016, International Review of Mechanical Engineering (I.RE.M.E.) (praiseworthy),vol.10,no.3.May 2016 pp.191-195
4) Shubham Patil, Preetam Selmokar, Sunil Patil, Sujit Pardeshi ,“Influence of process parameter during machining of graphite using micro-wire electric discharge machine”6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18,pp.1637-1640
5) A.M. Takale, N.K. Chougule, P.H.Selmokar, M.G. Gawari “Multi-Response Optimization of Micro-WEDM Process Parameters of Ti49.4-Ni50.6 Shape Memory Alloy for Orthopedic Implant Application A.M.” ,Advanced Materials Research, ISSN: 1662-8985, Vol. 1150, pp 1-21, doi:10.4028/www.scientific.net/AMR.1150.1,© 2018 Trans Tech Publications, Switzerland.
6) Mayur K. Bhure, Vineet M. Wanhede, Gaurav R. Arekar, Vrushali D. Tayade, Preetam H. Selmokar, “Integration of constant velocity joint with final drive of gearbox for eliminating transmission losses”, International journal of advance engineering and research development. Volume 5, Issue 07,pp:186-195,July-2018.
7) Mayur Gawari, Preetam Selmokar, Himanshu Sisodiya, Sujit Pardeshi “Experimental Investigation of MRR of NI-TI Alloy TI Alloy Using Micro-WEDM” International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore.
8) Shankar Durgam, Sweety Deshmukh, Preetam Selmokar, “Selection of aircraft materials and aircraft air conditioning technologies: A review”, Third International Conference on Materials Science and Manufacturing Technology, Apr 2021.
9) Durgam, S., Deshmukh, S. R., & Selmokar, P. (2022). Selection of aircraft materials and aircraft air conditioning technologies: A review. IOP Conference Series, 1258(1), 012036. https://doi.org/10.1088/1757-899x/1258/1/012036
10) Sumedh Kapsikar, P. H. Selmokar, H. P. Shinde, Kishor Raut, “Thermal Performance Analysis of Parabolic Trough Solar Collector”, International Virtual Conference on Emerging Trends in Engineering and Management Sciences (ICETEMS), July 2021
11) Sumedh Kapsikar, G. N. Kulkarni, P. H. Selmokar, “Analytical Characterization of Improvised Design of Parabolic Trough Solar Collector”, 2nd International Conference & Exposition on Advances In Mechanical Engineering (ICAME-2022), 23rd June 2022.
12) Sumedh Kapsikar, G.N. Kulkarni, P.H. Selmokar, Analytical characterization of improvised design of parabolic trough solar collector,Materials Today: Proceedings,Volume 72, Part 3, 2023, Pages 1847-1854, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.10.044.
13) Prathamesh Badgujar, Preetam Selmokar, “Driver Gaze Tracking and Eyes Off the Road Detection”, 2nd International Conference & Exposition on Advances In Mechanical Engineering (ICAME-2022), 23rd June 2022.
14) Badgujar, Prathamesh, and Preetam Selmokar. 2023. “Driver Gaze Tracking and Eyes off the Road Detection.” Materials Today: Proceedings 72: 1863–68.
15) Vishal Patil, G. N. Kulkarni, P. H. Selmokar, Sumedh Kapsikar, “Analytical And Experimental Characterization of Improvised Design of Parabolic Trough Solar Collector”, 3rd International Conference on Recent Advances in Materials, Manufacturing and Thermal Engineering (RAMMTE-2022), 8th July 2022.
16) Nitin Satpute; Atharva Joshi; Kaustubh Utpat; Nishant Kulkarni; Dharam Buddhi; Siddharth Jabade; Preetam Selmokar, “Preparation of biological micro powder based epoxy composite with improved damping factor and investigation for application in a MEMS sensor packaging,” 2022 3rd International Conference on Intelligent Engineering and Management (ICIEM), London, United Kingdom, 2022, pp. 791-796, doi: 10.1109/ICIEM54221.2022.9853069.
17) Nitin Vijay Satpute, Pushkaraj Kiran Fulambrikar, Preetam Selmokar, Nishant Kulkarni, Siddharth Jabade, Nikhil M. Shinde, Atharva Joshi, “Investigation of Damping and Stiffness Properties of Egg Shell Reinforced Thermoplastic Polymer,” 2022 3rd International Conference on Computation, Automation and Knowledge Management (ICCAKM), Dubai, United Arab Emirates, 2022, pp. 1-6, doi: 10.1109/ICCAKM54721.2022.9990216.
18) Vishal Rajesh Kakde, Krishna Nandan Prasad, Preetam Selmokar, Suhas Mohite, “Dynamic Analysis of Gun Barrel Deflection Due to Moving Projectile over Barrel length”, 3rd International Conference on Intelligent Robotics, Mechatronics And Automation Systems (IRMAS – 2023), 4th May, 2023.
19) Aniket Shivajirao Ghorpade, Milind Bokade, Suhas Mohite, Preetam Selmokar, “Design and development of a telescopic type miniaturised locking mechanism for performance enhancement of top attack ammunition system for gun launched and terminal end environment”, 3rd International Conference on Intelligent Robotics, Mechatronics And Automation Systems (IRMAS – 2023), 4th May, 2023.
20) S Wakchaure, Preetam Selmokar, Suhas Mohite, “Indian Road-Based Real-Time Pedestrian Detection System Using YOLOv8 for Autonomous Cars”, 3rd International Conference on Intelligent Robotics, Mechatronics And Automation Systems (IRMAS – 2023), 4th May, 2023.
21) P. Dhangar, P.H.Selmokar, N. Satpute, G. Korwar, N. Shinde and L. Jugulkar, “Self-Powered MEMS Sensor System for Monitoring of Ocean Parameters,” 2022 3rd International Conference on Computation, Automation and Knowledge Management (ICCAKM), Dubai, United Arab Emirates, 2022, pp. 1-6, doi: 10.1109/ICCAKM54721.2022.9990163
22) P. Dhangar, P. Selmokar, N. Satpute, “Development of Shape Memory Alloy based heat engine for solar energy harvesting” presented in 3rd International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT 2022), July 23 – 24, 2022, VIT Chennai
23) J. Rane, S. Mohite, J. Kale, and P. Selmokar, “Vehicle Distance Estimation by Servo-Mounted Monocular Camera Using Target Vehicle Yaw, Pitch Angles and Road Gradient” in The Third International Conference on Emerging Techniques in Computational Intelligence (ICETCI 2023), Hyderabad, India, September 21-23, 2023( communicated)
24) Vishal Rajesh Kakde, Preetam H. Selmokar, Sushas S. Mohite, A Comparative Study of Analytical and Numerical Methods for Gun Barrel Deflection, International Conference on Engineering and Technology (ICET -23) 19th August, 20 23
Research Projects
Working as a Co-PI for DST- SERB (SURE) project titled, “IoT based prognostics and health monitoring of a machining center incorporating digital-twin technology”.
Grant amount:- 29,99,700 INR
